Rockwell Automation, Inc. 1426-M5E-CNT

Powermonitor 5000 Base Quality Meter

Бренд: Rockwell Automation, Inc.
Артикул (MPN): 1426-M5E-CNT
Серия: 1426 PowerMonitor 5000 Series
Статус производства: Active

Технические характеристики

Build America, Buy America	No
Repair Options Available	No
General Features – Accuracy	0.20%
General Features – Alarm	true
General Features – Application	Power Management/Quality m
General Features – Communications	ControlNet and EtherNet/IP
General Features – Frequency Rating	40-75Hz
General Features – Interface	Webpage
Напряжение питания	600VLL AC
General Features – Output	4 Digital Relays
Data Handling – Alarm log	true
Environmental Operating Conditions – Altitude	2000 m, max
Power / Electrical Characteristics – Ampere meter	true
Measurement / Parameters – Apparent energy (kVAh)	true
Measurement / Parameters – Apparent power demand (kVA)	true
Measurement / Parameters – Apparent power (kVA)	true
Power / Electrical Characteristics – Blind power meter	true
Relays / Control Outputs – Break values	(Inductive load) 3A @ 120V AC, 50/60 Hz, RMS, maximum
General Features – CIP energy object	true
General Features – Configurable via webpage	true
General Features – Configuration lock switch	When enabled, this switch helps prevent changes in configuration that can affect revenue accuracy.
Communication / Interfaces – ControlNet	true
General Features – Control power and ground wiring terminals	• 120...240V AC @ 50/60Hz, or 120...240V DC • 24V DC
Inputoutput Specifications – Control power	12VA @ 24V DC
Inputs / Outputs Io – Control relay	ANSI C37.90 trip duty: 2005
Напряжение питания	22.8...25.2V DC @ 24V DC
Напряжение питания	85...264V AC, 47…63 Hz Or 106…275V DC
Measurement / Parameters – Crest factor	V-V, V-N, and I, per phase: Yes
Measurement / Parameters – Current consumption	true
Measurement / Parameters – Current per phase and total	true
Inputoutput Specifications – Current sense inputs: I1, I2, I3	Accuracy: ±0.1% @ 25°C 50/60 Hz unity power factor
Inputs / Outputs Io – Current sense inputs: I1, I2, I3, I4	Starting current : 5 mA
General Features – Current sensing wiring terminals	Nominal input current 5 A, Use current transformers (CTs) to connect to power system
Measurement / Parameters – Current unbalance	true
Data Handling – Data log	true
Measurement / Parameters – Demand, amps	true
General Features – Demand functions	• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
Measurement / Parameters – Demand power factor	true
Dimension – Depth	178 mm
Power / Electrical Characteristics – Description	PowerMonitor 5000 M5 unit with native ethernet and optional controlnet network communication
General Features – Device status indicators	• Device status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault
Environmental Operating Conditions – Dielectric withstand	UL61010, EN61010
Measurement / Parameters – Displacement power factor per phase and total	true
Power / Electrical Characteristics – Effective power measurement device	true
General Features – Energy functions	• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
Data Handling – Energy log	true
Communication / Interfaces – EtherNet/IP	true
General Features – Ethernet network port - standard RJ45 jack with status indicators	Ethernet port hardware is included on all models. these protocols and functions are supported: • EtherNet/IP™ network • HTML web page for configuration and data access ethernet indicators • LNK indicator - Solid GREEN: IP link established - Off: No link established • ACT indicator - Flashing YELLOW: Data present on ethernet port - Off: no data activity present
Data Handling – Event log	true
Measurement / Parameters – Frequency	Nominal: 60 Hz
Power / Electrical Characteristics – Frequency meter	true
General Features – Height	132 mm
Environmental Operating Conditions – Humidity	5...95% noncondensing
Relays / Control Outputs – IC rating class	UL 508, CSA 22.2 @ DC: Q300
General Features – IEEE 1588 precision time protocol	true
Environmental Operating Conditions – Installation location	Indoor use only
General Features – K-factor	true
Inputs / Outputs Io – KYZ output	Solid-state KYZ: 80mA @ 240V AC/V DC
Data Handling – Load factor log	true
Relays / Control Outputs – Load switching	100mA @ 5V AC, 50/60 Hz, RMS, minimum
Relays / Control Outputs – Make values	(Inductive load) 30A @ 120V AC, 50/60 Hz, RMS, maximum
General Features – Metering update rates	One update per line cycle, 1024 sAles per cycle per channel
Data Handling – Minimum/maximum log	true
Relays / Control Outputs – Motor load switching	1/3HP @ 125V AC, 50/60 Hz, RMS, maximum
General Features – Network demand synchronization	true
General Features – Network status indicators	• Network status (Native Ethernet port) - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate IP address detected
General Features – Network time synchronization	true
Environmental Operating Conditions – Operating temperature	-20 to 70 °C
General Features – Optional communication port	DeviceNet and ControlNet networks • Module status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault • Network status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate address detected
General Features – Power	•Power status - OFF: no control power - GREEN: control power is present
General Features – Power functions	• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
Measurement / Parameters – Projected amps demand	true
Measurement / Parameters – Projected kVA demand	true
Measurement / Parameters – Projected kVAR demand	true
Measurement / Parameters – Projected kW demand	true
Power / Electrical Characteristics – Pulse counter	true
General Features – Pulse (digital) output (relay and KYZ)	true
Measurement / Parameters – Reactive energy (kVARh)	true
Measurement / Parameters – Reactive power demand (kVAR)	true
Measurement / Parameters – Reactive power (kVAR)	true
Measurement / Parameters – Real energy (kWh)	true
Measurement / Parameters – Real power demand (kW)	true
Measurement / Parameters – Real power (kW)	true
Relays / Control Outputs – Resistive load switching	10A @ 24V DC, maximum
General Features – Revenue accuracy	true
General Features – Sag and swell detection	true
General Features – Security	true
Data Handling – Setpoint log	true
General Features – Setpoint programming	true
Environmental Operating Conditions – Shock	50 G, nonoperating
General Features – Status input, KYZ output, and control relay wiring terminals	• Four internally powered (24V DC) status inputs • Status input 2 can be used for demand period synchronization • KYZ DPDT solid-state relay for signaling use • Three DPDT control relays
General Features – Status inputs	true
Environmental Operating Conditions – Storage temperature	-40 to 85 °C
Measurement / Parameters – Symmetrical component analysis	true
Data Handling – Time of use log	true
General Features – Total harmonic distortion (THD)	true
Measurement / Parameters – True power factor per phase and total	true
General Features – USB device port	The USB device port is a USB Mini-B receptacle that accepts standard USB Mini-B plugs, for connection to a host device, such as a notebook computer.
General Features – USB host port	USB standard A receptacle. Not used in this model.
General Features – VG	Connect to power system earth ground only, This connection is a functional ground.
Environmental Operating Conditions – Vibration	2 G
General Features – Virtual wiring correction	true
General Features – Virtual wiring correction indicator	Indicates that a virtual wiring correction command has been applied to resolve wiring errors without rewiring
Напряжение питания	true
Напряжение питания	Input impedance: 5M Ω minimum
Напряжение питания	• Direct connect to up to 690V AC 3-phase line to line • Maximum nominal line to ground voltage 690 • Use potential transformers (PTs) for higher voltages • Neutral voltage and ground voltage connections
Напряжение питания	true
Power / Electrical Characteristics – Voltmeter	true
General Features – Web page	true
General Features – Width	185 mm
General Features – Wiring diagnostics	true

Получить предложение по этой позиции