SICK AG AFM60A-S7IB018X12
Absolute encoders AFM60A-S7IB018x12
Категории:
Технические характеристики
| Safety-related parameters (MTTF D (mean time to dangerous failure)) | 80 years (EN ISO 13849-1) 1) |
|---|---|
| Performance (Number of steps per revolution (max. resolution)) | 262,144 (18 bit) |
| Performance (Number of revolutions) | 4,096 (12 bit) |
| Performance (Max. resolution (number of steps per revolution x number of revolutions)) | 18 bit x 12 bit (262,144 x 4,096) |
| Performance (Error limits G) | 0.03° 1) |
| Performance (Repeatability standard deviation σ r) | 0.002° 2) |
| Interfaces (Communication interface) | EtherNet/IP™ |
| Interfaces (Encoder profile) | V4.1 class3 |
| Interfaces (Data transmission rate (baud rate)) | 10 Mbit/s, 100 Mbit/s |
| Interfaces (Transmission medium) | CAT-5e cable |
| Interfaces (Initialization time) | Approx. 10 s |
| Interfaces (RPI (requested packet interval)) | 5 ms ... 750 ms |
| Interfaces (Parameterising data) | Number of steps per revolution Number of revolutions PRESET Counting direction Sampling rate for speed calculation Unit for output of speed, acceleration and temperature value Output of scalable limit values such as: position ranges, speed, acceleration, start-up of the CW/CCW directions of rotation, change of direction of rotation, operating hours and hours of shaft movement (motion) Round axis functionality Heartbeat |
| Interfaces (Available diagnostics data) | Minimum and maximum temperature Maximumspeed Power-on counter Operatinghours counter power-on/motion Counter of direction changes/number of movements cw/number of movements ccw Number of changes of direction Minimum andmaximum operating voltage Signal monitoring for singleturn and multiturn |
| Interfaces (DLR (Device Level Ring)) | ✔ |
| Electronics (Connection type) | Male connector, 1x, M12, 4-pin, axial 1) Female connector, 2x, M12, 4-pin, axial 2) |
| Напряжение питания | 10 ... 30 V |
| Electronics (Power consumption) | ≤ 3 W (without load) |
| Electronics (Reverse polarity protection) | ✔ |
| Mechanics (Mechanical design) | Solid shaft, face mount flange |
| Mechanics (Shaft diameter) | 3/8″ |
| Mechanics (Shaft length) | 19 mm |
| Mechanics (Characteristics of the shaft) | With flat |
| Масса | 0.2 kg |
| Материал | Stainless steel |
| Материал | Aluminum |
| Материал | Aluminum |
| Mechanics (Start up torque) | 0.5 Ncm (+20 °C) |
| Mechanics (Operating torque) | 0.3 Ncm (+20 °C) |
| Mechanics (Permissible shaft loading) | 80 N (radial) 40 N (axial) |
| Mechanics (Operating speed) | ≤ 9,000 min⁻¹ 1) |
| Mechanics (Moment of inertia of the rotor) | 6.2 gcm² |
| Mechanics (Bearing lifetime) | 3 x 10^9 revolutions |
| Mechanics (Angular acceleration) | ≤ 500,000 rad/s² |
| Ambient data (EMC) | According to EN 61000-6-2 and EN 61000-6-3 |
| Степень защиты (IP) | IP65, shaft side (IEC 60529) IP67, housing side (IEC 60529) 1) |
| Ambient data (Permissible relative humidity) | 90 % (Condensation not permitted) |
| Ambient data (Operating temperature range) | –40 °C ... +85 °C |
| Ambient data (Storage temperature range) | –40 °C ... +100 °C, without package |
| Ambient data (Resistance to shocks) | 100 g, 6 ms (EN 60068-2-27) |
| Ambient data (Resistance to vibration) | 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Classifications (ECLASS 5.1.4) | 27270502 |
| Classifications (ECLASS 6.0) | 27270590 |
| Classifications (ECLASS 7.0) | 27270502 |
| Classifications (ECLASS 8.0) | 27270502 |
| Classifications (ECLASS 9.0) | 27270502 |
| Classifications (ECLASS 10.0) | 27270502 |
| Classifications (ECLASS 11.0) | 27270502 |
| Classifications (ECLASS 12.0) | 27270502 |
| Classifications (ECLASS 13.0) | 27270502 |
| Classifications (ECLASS 14.0) | 27270502 |
| Classifications (ECLASS 15.0) | 27270502 |
| Classifications (ETIM 6.0) | EC001486 |
| Classifications (ETIM 7.0) | EC001486 |
| Classifications (ETIM 8.0) | EC001486 |
| Classifications (ETIM 9.0) | EC001486 |
| Classifications (ETIM 10.0) | EC001486 |
| Classifications (UNSPSC 091201.0) | 39121527 |
| Classifications (UNSPSC 100501.0) | 39121527 |
| Classifications (UNSPSC 111201.0) | 39121527 |
| Classifications (UNSPSC 120901.0) | 39121527 |
| Classifications (UNSPSC 131201.0) | 39121527 |
| Classifications (UNSPSC 140801.0) | 39121527 |
| Classifications (UNSPSC 151101.0) | 39121527 |
| Classifications (UNSPSC 160901.0) | 39121527 |
| Classifications (UNSPSC 171001.0) | 39121527 |
| Classifications (UNSPSC 180801.0) | 39121527 |
| Classifications (UNSPSC 190501.0) | 39121527 |
| Classifications (UNSPSC 200601.0) | 39121527 |
| Classifications (UNSPSC 210901.0) | 39121527 |
| Classifications (UNSPSC 220601.0) | 39121527 |
| Classifications (UNSPSC 230701.0) | 39121527 |
| Classifications (UNSPSC 240301.0) | 39121527 |
| Classifications (UNSPSC 250901.0) | 39121527 |
| Classifications (UNSPSC 260801.0) | 39121527 |