SICK AG DBS60E-TEEPD1024
Incremental encoders DBS60E-TEEPD1024
Технические характеристики
| Safety-related parameters (MTTF D (mean time to dangerous failure)) | 500 years (EN ISO 13849-1) 1) |
|---|---|
| Performance (Pulses per revolution) | 1,024 |
| Performance (Measuring step) | ≤ 90°, electric/pulses per revolution |
| Performance (Measuring step deviation) | ± 18° / pulses per revolution |
| Performance (Error limits) | Measuring step deviation x 3 |
| Performance (Duty cycle) | ≤ 0.5 ± 5 % |
| Interfaces (Communication interface) | Incremental |
| Interfaces (Communication Interface detail) | HTL / Push pull |
| Interfaces (Number of signal channels) | 6-channel |
| Interfaces (Initialization time) | < 5 ms 1) |
| Interfaces (Output frequency) | + 300 kHz 2) |
| Interfaces (Load current) | ≤ 30 mA, per channel |
| Interfaces (Power consumption) | ≤ 1 W (without load) |
| Electronics (Connection type) | Cable, 8-wire, with male connector, M12, 8-pin, universal, 0.5 m 1) |
| Напряжение питания | 10 ... 27 V |
| Electronics (Reference signal, number) | 1 |
| Electronics (Reference signal, position) | 90°, electric, logically gated with A and B |
| Electronics (Reverse polarity protection) | ✔ |
| Electronics (Short-circuit protection of the outputs) | ✔ 2) |
| Mechanics (Mechanical design) | Through hollow shaft |
| Mechanics (Shaft diameter) | 12 mm Front clamp |
| Mechanics (Flange type / stator coupling) | 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm |
| Масса | + 0.25 kg 1) |
| Материал | Stainless steel |
| Материал | Aluminum |
| Материал | Aluminum |
| Материал | PVC |
| Mechanics (Start up torque) | + 0.5 Ncm (+20 °C) |
| Mechanics (Operating torque) | 0.4 Ncm (+20 °C) |
| Mechanics (Permissible movement static) | ± 0.3 mm (radial) ± 0.5 mm (axial) 2) |
| Mechanics (Permissible movement dynamic) | ± 0.1 mm (radial) ± 0.2 mm (axial) 2) |
| Mechanics (Operating speed) | 6,000 min⁻¹ 3) |
| Mechanics (Maximum operating speed) | 9,000 min⁻¹ 4) |
| Mechanics (Moment of inertia of the rotor) | 50 gcm² |
| Mechanics (Bearing lifetime) | 3.6 x 10 9 revolutions |
| Mechanics (Angular acceleration) | ≤ 500,000 rad/s² |
| Ambient data (EMC) | According to EN 61000-6-2 and EN 61000-6-3 |
| Степень защиты (IP) | IP65, housing side (IEC 60529) 1) IP65, shaft side (IEC 60529) |
| Ambient data (Permissible relative humidity) | 90 % (Condensation not permitted) |
| Ambient data (Operating temperature range) | –20 °C ... +85 °C 2) |
| Ambient data (Storage temperature range) | –40 °C ... +100 °C, without package |
| Ambient data (Resistance to shocks) | 250 g, 3 ms (EN 60068-2-27) |
| Ambient data (Resistance to vibration) | 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |