SICK AG EKS36-2KF0A0S12
Safe motor feedback systems EKS36-2KF0A0S12
Категории:
Технические характеристики
| Features (Special device) | ✔ |
|---|---|
| Features (Specialty) | Low-resistance connection cable between housing potential and mass Possibility to connect cable shield to housing potential on PIN4 of DSL connector |
| Features (Standard reference device) | EKS36-2KF0A018A, 1054315 |
| Features (Items supplied) | M3 mounting screws for stator coupling not included with delivery. |
| Safety-related parameters (Safety integrity level) | Safe increment SIL2 (IEC 61508), SILCL2 (EN 62061) 1) |
| Safety-related parameters (Category) | 3 (EN ISO 13849) |
| Safety-related parameters (Test rate) | 1 h |
| Safety-related parameters (Maximum demand rate) | 216 µs |
| Safety-related parameters (Performance level) | PL d (EN ISO 13849) |
| Safety-related parameters (Safety-related resolution) | Channel 1 = 18 bit or 20 bit, channel 2 = 9 bit |
| Safety-related parameters (T M (mission time)) | 20 years (EN ISO 13849) |
| Safety-related parameters (MTTF D (mean time to dangerous failure)) | 500 years (EN ISO 13849) |
| Performance (Position Resolution per revolution 18 bit System accuracy ± 120 ″ Signal noise (σ) ± 5 ″ (See “signal noise” and “attenuation” diagrams) Number of the absolute ascertainable revolutions 1 Available memory area 8,192 Byte Measurement step per revolution 262,144 Measurement principle Optical) | Position |
| Performance (Resolution per revolution) | 18 bit |
| Performance (System accuracy) | ± 120 ″ |
| Performance (Signal noise (σ)) | ± 5 ″ (See “signal noise” and “attenuation” diagrams) |
| Performance (Number of the absolute ascertainable revolutions) | 1 |
| Performance (Available memory area) | 8,192 Byte |
| Performance (Measurement step per revolution) | 262,144 |
| Performance (Measurement principle) | Optical |
| Interfaces (Type of code for the absolute value) | Binary |
| Interfaces (Code sequence) | Increasing, when turning the shaft For clockwise rotation, looking in direction “A” (see dimensional drawing) |
| Interfaces (Communication interface) | HIPERFACE DSL® |
| Interfaces (Initialization time) | Max. 500 ms 1) |
| Interfaces (Measurement external temperature resistance) | 32 bit value, without prefix (1 Ω) 0 ... 209.600 Ω At –40 °C ... +160 °C: NTC +-2K; PTC+-3K |
| Electronics (Connection type) | Male connector, 4-pin |
| Напряжение питания | 7 V ... 12 V |
| Напряжение питания | Max. 180 ms 1) |
| Напряжение питания | 8 V |
| Electronics (Current consumption) | ≤ 150 mA (See current consumption diagram) 2) |
| Electronics (Output frequency for the digital positionvalue) | 0 kHz ... 75 kHz |
| Mechanics (Shaft version) | Tapered shaft |
| Mechanics (Dimensions) | See dimensional drawing |
| Масса | 0.1 kg |
| Mechanics (Moment of inertia of the rotor) | 4.5 gcm² |
| Mechanics (Operating speed) | ≤ 12,000 min⁻¹ |
| Mechanics (Angular acceleration) | ≤ 500,000 rad/s² |
| Mechanics (Operating torque) | 0.2 Ncm |
| Mechanics (Start up torque) | 0.3 Ncm |
| Mechanics (Permissible movement static) | ± 0.2 mm, radial - 1.4 mm, axial + 0.6 mm, axial |
| Mechanics (Permissible movement dynamic) | ± 0.05 mm, radial |
| Mechanics (Life of ball bearings) | 3.6 x 10^9 revolutions |
| Ambient data (Operating temperature range) | –20 °C ... +115 °C 1) |
| Ambient data (Storage temperature range) | –40 °C ... +125 °C 2) |
| Ambient data (Relative humidity/condensation) | 90 %, Condensation not permitted |
| Ambient data (Resistance to shocks) | 100 g, 6 ms (according to EN 60068-2-27) |
| Ambient data (Frequency range of resistance to vibrations) | 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Ambient data (EMC) | According to EN 61000-6-2, EN 61000-6-4 and IEC 61326-3 3) |
| Степень защиты (IP) | IP40, with mating plugs inserted and cover closed (IEC 60529-1) |
| Ambient data (Operating height (above sea level)) | 2,000 m |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Classifications (ECLASS 5.1.4) | 27270502 |
| Classifications (ECLASS 6.0) | 27270590 |
| Classifications (ECLASS 7.0) | 27270501 |
| Classifications (ECLASS 8.0) | 27270501 |
| Classifications (ECLASS 9.0) | 27270501 |
| Classifications (ECLASS 10.0) | 27273805 |
| Classifications (ECLASS 11.0) | 27273901 |
| Classifications (ECLASS 12.0) | 27273901 |
| Classifications (ECLASS 13.0) | 27273901 |
| Classifications (ECLASS 14.0) | 27273901 |
| Classifications (ECLASS 15.0) | 27273901 |
| Classifications (ETIM 6.0) | EC001486 |
| Classifications (ETIM 7.0) | EC001486 |
| Classifications (ETIM 8.0) | EC001486 |
| Classifications (ETIM 9.0) | EC001486 |
| Classifications (ETIM 10.0) | EC001486 |
| Classifications (UNSPSC 091201.0) | 41112100 |
| Classifications (UNSPSC 100501.0) | 41112100 |
| Classifications (UNSPSC 111201.0) | 41112100 |
| Classifications (UNSPSC 120901.0) | 41112100 |
| Classifications (UNSPSC 131201.0) | 41112113 |
| Classifications (UNSPSC 140801.0) | 41112113 |
| Classifications (UNSPSC 151101.0) | 41112113 |
| Classifications (UNSPSC 160901.0) | 41112113 |
| Classifications (UNSPSC 171001.0) | 41112113 |
| Classifications (UNSPSC 180801.0) | 41112113 |
| Classifications (UNSPSC 190501.0) | 41112113 |
| Classifications (UNSPSC 200601.0) | 41112113 |
| Classifications (UNSPSC 210901.0) | 41112113 |
| Classifications (UNSPSC 220601.0) | 41112113 |
| Classifications (UNSPSC 230701.0) | 41112113 |
| Classifications (UNSPSC 240301.0) | 41112113 |
| Classifications (UNSPSC 250901.0) | 41112113 |
| Classifications (UNSPSC 260801.0) | 41112113 |