SICK AG IMC18-12NPPVC0SA70
Индуктивные датчики приближения IMC18-12NPPVC0SA70
Категории:
Технические характеристики
| Features (Housing) | Metric |
|---|---|
| Features (Thread size) | M18 x 1 |
| Features (Diameter) | Ø 18 mm |
| Features (Sensing range S n) | 0 mm ... 12 mm 1) |
| Features (Safe sensing range S a) | 9.72 mm |
| Features (Number of switching points) | Up to 4 adjustable switching points or windows |
| Features (Switching modes) | Single point, Window mode, Two point mode, Visual adjustment indicator |
| Features (Switching frequency Qint.1 / Qint.2 on Pin2) | 250 Hz |
| Features (Installation type) | Non-flush |
| Features (Connection type) | Male connector M12, 4-pin 2) |
| Features (Switching output) | PNP |
| Features (Switching output detail) | PNP |
| Features (Output Q/C) | Switching output or IO-Link mode |
| Features (Output MFC) | Switching output or input |
| Features (Output function) | NC / NO |
| Features (Output characteristic) | Programmable |
| Features (Electrical wiring) | DC 4-wire |
| Степень защиты (IP) | IP68 3) IP69K 4) |
| Features (Special features) | Smart Task, Resistant against coolant lubricants |
| Features (Special applications) | Zones with coolants and lubricants, Difficult application conditions |
| Features (Special characteristic) | Resistant against coolant lubricants |
| Features (Pin 2 configuration) | External input, Teach-in, switching signal |
| Features (Items supplied) | Mounting nut, V2A stainless steel, with locking teeth (2x) |
| Напряжение питания | 10 V DC ... 30 V DC 1) |
| Mechanics/electronics (Ripple) | ≤ 10 % |
| Напряжение питания | ≤ 2 V 2) |
| Mechanics/electronics (Hysteresis) | Programmable 3) |
| Mechanics/electronics (Reproducibility) | ≤ 5 % 4) 5) |
| Mechanics/electronics (Temperature drift (of S r )) | ± 10 % |
| Mechanics/electronics (EMC) | According to EN 60947-5-2 |
| Mechanics/electronics (Continuous current I a) | ≤ 200 mA 6) |
| Mechanics/electronics (Short-circuit protection) | ✔ |
| Mechanics/electronics (Power-up pulse protection) | ✔ |
| Mechanics/electronics (Shock and vibration resistance) | 100 g / 2 ms / 500 cycles; 150 g / 1 Mio cycles; 10 Hz ... 55 Hz / 1 mm; 55 Hz ... 500 Hz / 60 g |
| Mechanics/electronics (Ambient operating temperature) | –40 °C ... +75 °C |
| Материал | Stainless steel V2A, DIN 1.4305 / AISI 303 |
| Материал | Plastic, LCP |
| Mechanics/electronics (Housing length) | 65 mm |
| Mechanics/electronics (Thread length) | 39 mm |
| Mechanics/electronics (Tightening torque, max.) | Typ. 90 Nm 7) |
| Mechanics/electronics (UL File No.) | E181493 |
| Mechanics/electronics (Teach-in accuracy) | +/- 3% of Sr |
| Mechanics/electronics (Resolution, typical (range)) | 40 μm (0 mm ... 8 mm) 75 μm (8 mm ... 10 mm) 150 μm (10 mm ... 12 mm) |
| Mechanics/electronics (Resolution, maximum (area)) | 75 μm (8 mm ... 10 mm) 150 μm (10 mm ... 12 mm) 300 μm (10 mm ... 12 mm) |
| Safety-related parameters (MTTF D) | 688 years |
| Safety-related parameters (DC avg) | 0 % |
| Safety-related parameters (T M (mission time)) | 20 years |
| Communication interface (Communication interface) | IO-Link V1.1 |
| Communication interface (Communication Interface detail) | COM2 (38,4 kBaud) |
| Communication interface (Cycle time) | 5 ms |
| Communication interface (Process data length) | 32 Bit |
| Communication interface (Process data structure) | Bit 0 = switching signal Q L1 Bit 1 = switching signal Q L2 Bit 2 = switching signal Q Int3 Bit 3 = switching signal Q Int4 Bit 18 ... 31 = time value |
| Communication interface (Factory setting) | Switching Point 1: reference value 1 Output: normally open Pin 2 configuration: input |
| Reference values (Note) | Reference value in Digits for switching point in mm stored in the sensor |
| Reference values (Reference value 1) | 12 mm |
| Reference values (Reference value 2) | 10 mm |
| Reference values (Reference value 3) | 8 mm |
| Reference values (Reference value 4) | 5 mm |
| Reduction factors (Stainless steel (V2A, 304)) | Approx. 0.7 |
| Reduction factors (Aluminum (Al)) | Approx. 0.4 |
| Reduction factors (Copper (Cu)) | Approx. 0.4 |
| Reduction factors (Brass (Br)) | Approx. 0.4 |
| Installation note (Remark) | Associated graphic see "Installation" |
| Installation note (A) | 18 mm |
| Installation note (B) | 45 mm |
| Installation note (C) | 18 mm |
| Installation note (D) | 36 mm |
| Installation note (E) | 12 mm |
| Installation note (F) | 96 mm |
| Smart Task (Smart Task name) | Time measurement + debouncing |
| Smart Task (Logic function) | Window Direct |
| Smart Task (Timer function) | Deactivated Switch-on delay Off delay ON and OFF delay Impulse (one shot) |
| Smart Task (Inverter) | Adjustable |
| Smart Task (Time measurement accuracy) | SIO Logic: (-1,2 ... 0) x time base ± 1 % of time measurement value 1) IOL: (-1,2 ... 0) x time base ± 1 % of time measurement value 2) |
| Smart Task (Time measurement accuracy (e.g. accuracy for time measurement value = 1 s )) | Time base 1 ms: –11,2 ms ... 10 ms |
| Smart Task (Resolution time measuring value) | 2 ms |
| Smart Task (Debounce time max.) | SIO Logic: 30 s 1) IOL: 30 s 2) |
| Smart Task (Switching signal Switching signal Q L1 Output type (dependant on the adjusted threshold) Switching signal Q L2 Output type (dependant on the adjusted threshold)) | Switching signal |
| Smart Task (Switching signal Q L1) | Output type (dependant on the adjusted threshold) |
| Smart Task (Switching signal Q L2) | Output type (dependant on the adjusted threshold) |
| Smart Task (Measuring value) | Time measurement value |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Classifications (ECLASS 5.1.4) | 27270101 |
| Classifications (ECLASS 6.0) | 27270101 |
| Classifications (ECLASS 7.0) | 27270101 |
| Classifications (ECLASS 8.0) | 27270101 |
| Classifications (ECLASS 9.0) | 27270101 |
| Classifications (ECLASS 10.0) | 27270101 |
| Classifications (ECLASS 11.0) | 27270101 |
| Classifications (ECLASS 12.0) | 27274001 |
| Classifications (ECLASS 13.0) | 27274001 |
| Classifications (ECLASS 14.0) | 27274001 |
| Classifications (ECLASS 15.0) | 27274001 |
| Classifications (ETIM 6.0) | EC002714 |
| Classifications (ETIM 7.0) | EC002714 |
| Classifications (ETIM 8.0) | EC002714 |
| Classifications (ETIM 9.0) | EC002714 |
| Classifications (ETIM 10.0) | EC002714 |
| Classifications (UNSPSC 091201.0) | 39121500 |
| Classifications (UNSPSC 100501.0) | 39121500 |
| Classifications (UNSPSC 111201.0) | 39121500 |
| Classifications (UNSPSC 120901.0) | 39121500 |
| Classifications (UNSPSC 131201.0) | 39122230 |
| Classifications (UNSPSC 140801.0) | 39122230 |
| Classifications (UNSPSC 151101.0) | 39122230 |
| Classifications (UNSPSC 160901.0) | 39122230 |
| Classifications (UNSPSC 171001.0) | 39122230 |
| Classifications (UNSPSC 180801.0) | 39122230 |
| Classifications (UNSPSC 190501.0) | 39122230 |
| Classifications (UNSPSC 200601.0) | 39122230 |
| Classifications (UNSPSC 210901.0) | 39122230 |
| Classifications (UNSPSC 220601.0) | 39122230 |
| Classifications (UNSPSC 230701.0) | 39122230 |
| Classifications (UNSPSC 240301.0) | 39122230 |
| Classifications (UNSPSC 250901.0) | 39122230 |
| Classifications (UNSPSC 260801.0) | 39122230 |