SICK AG IMS18-08BPONC0S
Индуктивные датчики приближения IMS18-08BPONC0S
Категории:
Технические характеристики
| Features (Housing) | Metric |
|---|---|
| Features (Thread size) | M18 x 1 |
| Features (Diameter) | Ø 18 mm |
| Features (Sensing range S n) | 8 mm |
| Features (Safe sensing range S a) | 6.48 mm |
| Features (Installation type) | Quasi-flush 1) |
| Features (Switching frequency) | 1,000 Hz |
| Features (Connection type) | Male connector M12, 4-pin 2) |
| Features (Switching output) | PNP |
| Features (Switching output detail) | PNP |
| Features (Output function) | NC |
| Features (Electrical wiring) | DC 3-wire |
| Степень защиты (IP) | IP68 3) IP69K 4) |
| Features (Special features) | Resistant to cleaning agents, Temperature resistance |
| Features (Special applications) | Mobile machines, Hygienic and washdown zones, Difficult application conditions |
| Features (Items supplied) | Mounting nut, brass, nickel-plated (2x) |
| Напряжение питания | 7.2 V DC ... 60 V DC |
| Mechanics/electronics (Ripple) | ≤ 10 % |
| Напряжение питания | ≤ 2.5 V 1) |
| Mechanics/electronics (Time delay before availability) | 100 ms |
| Mechanics/electronics (Hysteresis) | 3 % ... 20 % |
| Mechanics/electronics (Reproducibility) | ≤ 2 % 2) |
| Mechanics/electronics (Temperature drift (of S r )) | ± 10 % |
| Mechanics/electronics (EMC) | Emitted interference and interference immunity in accordance with Motor Insurance Directive ECE-R10 Rev. 5: E1-Type approval Interference immunity in accordance with DIN ISO 11452-2: 100 V/m AM vertical 20 MHz - 800 MHz; AM horizontal 200 MHz - 800 MHz; PM vertical/horizontal 800 MHz - 2.7 GHz Conducted disturbances in accordance with ISO 7637-2 (pulse/severity/failure criterion 12 V/failure criterion 24 V): 1/IV/C/C, 2a/IV/A/A, 2b/IV/C/C, 3a/IV/A/A, 3b/IV/A/A, 4/IV/C/A, 5a/IV/B/B, 5b/IV/B/B EN 61000-4-2 ESD: 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated: 10 V/m EN 61000-4-4 burst: 2 kV EN 61000-4-5 surge: 0,5 kV L-to-L, Ri: 2 Ohm EN 61000-4-6 HF wire-bound: 10 V |
| Mechanics/electronics (Environmental test) | Quick temperature change EN 60068-2-14, Na: TA = –25 °C, TB = 75 °C, t1 = 40 min, t2 = < 10 s, 300 cycles, Delta S r ≤ 10% |
| Mechanics/electronics (Corrosion test) | Salt spray test EN 60068-2-52: severity 5, 4 cycles |
| Mechanics/electronics (Continuous current I a) | ≤ 200 mA 3) |
| Mechanics/electronics (No load current) | ≤ 10 mA |
| Mechanics/electronics (Short-circuit protection) | ✔ |
| Mechanics/electronics (Power-up pulse protection) | ✔ |
| Mechanics/electronics (Shock and vibration resistance) | Vibration resistance EN 60068-2-6 Fc: 25 g peak (10 Hz ... 2,000 Hz) / –20 °C ... +50 °C Shock resistance EN 60068-2-27 Ea: 100 g 11 ms; 3 shocks in every direction of the 3 coordinate axes / –40 °C ... +85 °C Continuous shock resistance EN 60068-2-29 Eb: 40 g 3 ms rise, 7 ms fall / 5,000 shocks in every direction of the 3 coordinate axes / -20 °C ... +50 °C Broadband noise EN 60068-2-64: 15 g rms (5 Hz ... 2,000 Hz) / 8 hours in every direction of the 3 coordinate axes / –40 °C ... +85 °C |
| Mechanics/electronics (Ambient operating temperature) | –40 °C ... +100 °C |
| Материал | Stainless steel V4A, DIN 1.4404 / AISI 316L |
| Материал | Plastic, LCP |
| Mechanics/electronics (Housing length) | 69 mm |
| Mechanics/electronics (Thread length) | 51 mm |
| Mechanics/electronics (Tightening torque, max.) | Typ. 60 Nm |
| Mechanics/electronics (Protection class) | III |
| Mechanics/electronics (UL File No.) | E181493 |
| Safety-related parameters (MTTF D) | 1,196 years |
| Safety-related parameters (DC avg) | 0 % |
| Reduction factors (Note) | The values are reference values which may vary |
| Reduction factors (Stainless steel (V2A, 304)) | Approx. 0.55 |
| Reduction factors (Aluminum (Al)) | Approx. 0.24 |
| Reduction factors (Copper (Cu)) | Approx. 0.19 |
| Reduction factors (Brass (Br)) | Approx. 0.24 |
| Installation note (Remark) | Associated graphic see "Installation" |
| Installation note (A) | 9 mm |
| Installation note (B) | 18 mm |
| Installation note (C) | 18 mm |
| Installation note (D) | 24 mm |
| Installation note (E) | 2 mm |
| Installation note (F) | 64 mm |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Сертификация | ✔ |
| Classifications (ECLASS 5.1.4) | 27270101 |
| Classifications (ECLASS 6.0) | 27270101 |
| Classifications (ECLASS 7.0) | 27270101 |
| Classifications (ECLASS 8.0) | 27270101 |
| Classifications (ECLASS 9.0) | 27270101 |
| Classifications (ECLASS 10.0) | 27270101 |
| Classifications (ECLASS 11.0) | 27270101 |
| Classifications (ECLASS 12.0) | 27274001 |
| Classifications (ECLASS 13.0) | 27274001 |
| Classifications (ECLASS 14.0) | 27274001 |
| Classifications (ECLASS 15.0) | 27274001 |
| Classifications (ETIM 6.0) | EC002714 |
| Classifications (ETIM 7.0) | EC002714 |
| Classifications (ETIM 8.0) | EC002714 |
| Classifications (ETIM 9.0) | EC002714 |
| Classifications (ETIM 10.0) | EC002714 |
| Classifications (UNSPSC 091201.0) | 39121500 |
| Classifications (UNSPSC 100501.0) | 39121500 |
| Classifications (UNSPSC 111201.0) | 39121500 |
| Classifications (UNSPSC 120901.0) | 39121500 |
| Classifications (UNSPSC 131201.0) | 39122230 |
| Classifications (UNSPSC 140801.0) | 39122230 |
| Classifications (UNSPSC 151101.0) | 39122230 |
| Classifications (UNSPSC 160901.0) | 39122230 |
| Classifications (UNSPSC 171001.0) | 39122230 |
| Classifications (UNSPSC 180801.0) | 39122230 |
| Classifications (UNSPSC 190501.0) | 39122230 |
| Classifications (UNSPSC 200601.0) | 39122230 |
| Classifications (UNSPSC 210901.0) | 39122230 |
| Classifications (UNSPSC 220601.0) | 39122230 |
| Classifications (UNSPSC 230701.0) | 39122230 |
| Classifications (UNSPSC 240301.0) | 39122230 |
| Classifications (UNSPSC 250901.0) | 39122230 |
| Classifications (UNSPSC 260801.0) | 39122230 |