SI
Siemens AG 6ES7132-6BD21-0BA0
Модуль ввода-вывода Siemens 6ES7132-6BD21-0BA0, серия ET200SP. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.
Категории:
Технические характеристики
| Data sheet designation | SIMATIC ET 200SP, digital output module DQ 4x24 V DC/2 A standard, source output (PNP,sourcing output) packing unit: 1 unit, suitable for BU type A0, color code CC02, substitute value output, module diagnostics for: short circuit to L+ and M, wire break, supply voltage |
|---|---|
| General information / Product type designation | DQ 4x24VDC/2A ST |
| General information / HW functional status | 01 |
| General information / Firmware version | V1.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0 |
| General information / Color code for module-specific color-coded label | CC02 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Operating mode / DQ with energy-saving function | No |
| General information / Operating mode / Oversampling | No |
| Напряжение питания | 24 V |
| Напряжение питания | 19.2 V |
| Напряжение питания | 28.8 V |
| Напряжение питания | Yes |
| Input current / Current consumption, max. | 20 mA; without load |
| Напряжение питания | 24 V |
| Power loss / Power loss, typ. | 1 W |
| Address area / Address space per module / Address space per module, max. | 1 byte; + 1 byte for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Hardware configuration / Selection of BaseUnit for connection variants / 1-wire connection | BU type A0 |
| Hardware configuration / Selection of BaseUnit for connection variants / 2-wire connection | BU type A0 |
| Hardware configuration / Selection of BaseUnit for connection variants / 3-wire connection | BU type A0 with AUX terminals or potential distributor module |
| Digital outputs / Type of digital output | Source output (PNP, current-sourcing) |
| Digital outputs / Number of digital outputs | 4 |
| Digital outputs / Current-sinking | No |
| Digital outputs / Current-sourcing | Yes |
| Digital outputs / Digital outputs, parameterizable | Yes |
| Digital outputs / output type acc. to IEC 61131, type 2 | Yes |
| Digital outputs / Short-circuit protection | Yes; Electronic |
| Digital outputs / Response threshold, typ. | 2.8 to 5.2 A |
| Digital outputs / Open-circuit detection | Yes |
| Напряжение питания | Typ. L+ (-50 V) |
| Digital outputs / Controlling a digital input | Yes; supports input type 3 according to IEC 61131-2 |
| Digital outputs / Switching capacity of the outputs / with resistive load, max. | 2 A |
| Digital outputs / Switching capacity of the outputs / with inductive load, max. | 2 A |
| Digital outputs / Switching capacity of the outputs / on lamp load, max. | 10 W |
| Digital outputs / Load resistance range / lower limit | 12 Ω |
| Digital outputs / Load resistance range / upper limit | 3 400 Ω |
| Digital outputs / Output current / for signal "1" rated value | 2 A |
| Digital outputs / Output current / for signal "1" permissible range, max. | 2 A |
| Digital outputs / Output current / for signal "0" residual current, max. | 0.1 mA |
| Digital outputs / Output delay with resistive load / "0" to "1", typ. | 50 µs |
| Digital outputs / Output delay with resistive load / "1" to "0", typ. | 100 µs |
| Digital outputs / Parallel switching of two outputs / for uprating | No |
| Digital outputs / Parallel switching of two outputs / for redundant control of a load | Yes |
| Digital outputs / horizontal installation / up to 40 °C, max. | 8 A |
| Digital outputs / horizontal installation / up to 50 °C, max. | 6 A |
| Digital outputs / horizontal installation / up to 60 °C, max. | 4 A |
| Digital outputs / vertical installation / up to 30 °C, max. | 8 A |
| Digital outputs / vertical installation / up to 40 °C, max. | 6 A |
| Digital outputs / vertical installation / up to 50 °C, max. | 4 A |
| Digital outputs / Cable length / shielded, max. | 1 000 m |
| Digital outputs / Cable length / unshielded, max. | 600 m |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Substitute values connectable | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Напряжение питания | Yes |
| Interrupts/diagnostics/status information / Diagnoses / parameterizable | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes; module-wise |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit to ground | Yes; module-wise |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit to L+ | Yes; module-wise |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Напряжение питания | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Напряжение питания | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Сертификация | No |
| Сертификация | Yes |
| Сертификация | 29.3 kg |
| Сертификация | 3.98 kg |
| Сертификация | 25.6 kg |
| Рабочая температура | -30 °C |
| Рабочая температура | 60 °C |
| Рабочая температура | -30 °C |
| Рабочая температура | 50 °C |
| Dimensions / Height | 73 mm |
| Dimensions / Depth | 58 mm |