SI
Siemens AG 6ES7134-6GB00-0BA1
Модуль ввода-вывода Siemens 6ES7134-6GB00-0BA1, серия ET200SP. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.
Категории:
Технические характеристики
| Data sheet designation | SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-wire Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC05, Module diagnostics, 16 bit |
|---|---|
| General information / Product type designation | AI 2xI 2-/4-wire ST |
| General information / HW functional status | FS22 or higher |
| General information / Firmware version | V2.0.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0, A1 |
| General information / Color code for module-specific color-coded label | CC05 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Product function / Measuring range scalable | No |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V21 HSP0492 / integrated as of V21.1 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.7 SP3 HF3 with HSP0348 V2.0 / integrated as of V5.8 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.45 |
| General information / Operating mode / Oversampling | No |
| CiR - Configuration in RUN / Reparameterization possible in RUN | Yes |
| CiR - Configuration in RUN / Calibration possible in RUN | No |
| Напряжение питания | 24 V |
| Напряжение питания | 19.2 V |
| Напряжение питания | 28.8 V |
| Напряжение питания | Yes |
| Input current / Current consumption (rated value) | 37.5 mA |
| Input current / Current consumption, max. | 245 mA |
| Encoder supply / 24 V encoder supply / 24 V | Yes |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes |
| Encoder supply / 24 V encoder supply / Output current, max. | 50 mA; Total current for both channels (two-wire) |
| Encoder supply / Additional 24 V encoder supply / 24 V | Yes |
| Encoder supply / Additional 24 V encoder supply / Short-circuit protection | Yes; module-wise |
| Encoder supply / Additional 24 V encoder supply / Output current, max. | 200 mA; Total current for both channels (four-wire) |
| Power loss / Power loss, typ. | 0.9 W |
| Address area / Address space per module / Address space per module, max. | 4 byte; + 1 byte for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Hardware configuration / Selection of BaseUnit for connection variants / 1-wire connection | BU type A0, A1 |
| Hardware configuration / Selection of BaseUnit for connection variants / 2-wire connection | BU type A0, A1 |
| Hardware configuration / Selection of BaseUnit for connection variants / 4-wire connection | BU type A0, A1 |
| Analog inputs / Number of analog inputs | 2 |
| Analog inputs / Input ranges (rated values), currents / 0 to 20 mA | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), currents / Input resistance (0 to 20 mA) | 130 Ω; 90 ohms with two wires |
| Analog inputs / Input ranges (rated values), currents / -20 mA to +20 mA | Yes; 16 bit incl. sign |
| Analog inputs / Input ranges (rated values), currents / Input resistance (-20 mA to +20 mA) | 130 Ω |
| Analog inputs / Input ranges (rated values), currents / 4 mA to 20 mA | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), currents / Input resistance (4 mA to 20 mA) | 130 Ω; 90 ohms with two wires |
| Analog inputs / Cable length / shielded, max. | 1 000 m |
| Analog value generation for the inputs / Measurement principle | Sigma Delta |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Напряжение питания | 16.6 / 50 / 60 Hz / off |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Conversion time (per channel) | 50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 500 µs without filter |
| Analog value generation for the inputs / Smoothing of measured values / Number of smoothing levels | 4 |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes |
| Analog value generation for the inputs / Smoothing of measured values / Step: None | Yes; 1x conversion time |
| Analog value generation for the inputs / Smoothing of measured values / Step: low | Yes; 4x conversion time |
| Analog value generation for the inputs / Smoothing of measured values / Step: Medium | Yes; 8x conversion time |
| Analog value generation for the inputs / Smoothing of measured values / Step: High | Yes; 16x conversion time |
| Encoder / Connection of signal encoders / for current measurement as 2-wire transducer | Yes |
| Encoder / Connection of signal encoders / Burden of 2-wire transmitter, max. | 650 Ω |
| Encoder / Connection of signal encoders / for current measurement as 4-wire transducer | Yes |
| Errors/accuracies / Linearity error (relative to input range), (+/-) | 0.01 % |
| Errors/accuracies / Temperature error (relative to input range), (+/-) | 0.005 %/K |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to input range, (+/-) | 0.3 % |
| Напряжение питания | frequency |
| Errors/accuracies / Series mode interference (peak value of interference < | 70 dB |
| Напряжение питания | 10 V |
| Errors/accuracies / Common mode interference, min. | 90 dB |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Limit value alarm | No |
| Напряжение питания | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes; at 4 to 20 mA |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | Yes; Short-circuit of the encoder supply |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes |
| Напряжение питания | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Сертификация | Yes |
| Сертификация | 9.32 kg |
| Сертификация | 4.97 kg |
| Сертификация | 4.79 kg |
| Рабочая температура | -30 °C; < 0 °C as of FS04 |
| Рабочая температура | 60 °C |
| Рабочая температура | -30 °C; < 0 °C as of FS04 |
| Рабочая температура | 50 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Ambient conditions / Absolute humidity / dew point, min. | -60 °C; suitable for dry room applications |
| Dimensions / Width | 15 mm |
| Dimensions / Height | 73 mm |
| Dimensions / Depth | 58 mm |