ПЛК и системы автоматизации
SI

Siemens AG 6ES7134-6PA21-0CU0

Модуль ввода-вывода Siemens 6ES7134-6PA21-0CU0, серия ET200SP. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.

  • Бренд: Siemens AG
  • Артикул (MPN): 6ES7134-6PA21-0CU0
  • Серия: ET200SP Series
  • Статус производства: Не определён

Категории:

Технические характеристики

Data sheet designationSIMATIC ET 200SP, analog input module, AI Energy Meter RC HF, for Rogowski coils or current/voltage transformer 333 mV, with network analysis functions, suitable for BU type U0, channel diagnostics
General information / Product type designationAI Energy Meter RC HF
General information / Firmware versionV8.0
General information / FW update possibleYes
General information / usable BaseUnitsBU type U0
General information / Color code for module-specific color-coded labelCC20
General information / Supported power supply systemsTT, TN, IT
Напряжение питанияYes
Напряжение питанияYes
Напряжение питанияYes
General information / Product function / Current measurementYes; Max. 4
General information / Product function / without current transformerNo
General information / Product function / with current transformerNo
General information / Product function / With Rogowski coilYes
Напряжение питанияYes; 333 mV interface
General information / Product function / Energy measurementYes
General information / Product function / Frequency measurementYes
General information / Product function / Power measurementYes
General information / Product function / Active power measurementYes
General information / Product function / Reactive power measurementYes
General information / Product function / Power factor measurementYes
General information / Product function / Active factor measurementYes
General information / Product function / Reactive power compensationYes
General information / Product function / Line analysisYes
General information / Product function / Monitoring of instantaneous and half-wave valuesYes
Напряжение питанияYes
Напряжение питанияYes
Напряжение питанияYes
Напряжение питанияYes
General information / Product function / I&M dataYes; I&M0 to I&M3
General information / Product function / Isochronous modeNo
General information / Engineering with / STEP 7 TIA Portal configurable/integrated from versionSTEP 7 V16 or higher with HSP
General information / Engineering with / STEP 7 configurable/integrated from versionV5.5 SP3 or higher
General information / Engineering with / PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
General information / Engineering with / PROFINET from GSD version/GSD revisionV2.3
General information / Operating mode / Fixed measured value setsYes
General information / Operating mode / Freely definable measured value setsYes; For cyclic and acyclic measured value access
CiR - Configuration in RUN / Reparameterization possible in RUNYes
CiR - Configuration in RUN / Calibration possible in RUNYes
Installation type/mounting / Mounting positionany
Напряжение питания24 V
Напряжение питания19.2 V
Напряжение питания28.8 V
Input current / Current consumption (rated value)12.5 mA
Input current / Current consumption, max.17 mA
Power loss / Power loss, typ.400 mW; 3x 230 V AC
Address area / Address space per module / Inputs256 byte
Address area / Address space per module / Outputs20 byte
Hardware configuration / Automatic encodingYes
Hardware configuration / Mechanical coding elementYes
Hardware configuration / Type of mechanical coding elementtype C
Hardware configuration / Selection of BaseUnit for connection variants / 2-wire connectionBU type U0
Time of day / Operating hours counter / presentYes
Analog inputs / Cable length / unshielded, max.200 m
Analog value generation for the inputs / Sampling frequency, max.2 048 kHz
Interrupts/diagnostics/status information / Alarms / Diagnostic alarmYes
Напряжение питанияYes
Interrupts/diagnostics/status information / Diagnoses / Hardware interrupt lostYes
Interrupts/diagnostics/status information / Diagnoses / Parameter assignment errorYes
Interrupts/diagnostics/status information / Diagnoses / Module faultYes
Interrupts/diagnostics/status information / Diagnoses / Channel not availableYes
Interrupts/diagnostics/status information / Diagnoses / Overflow/UnderflowYes
Interrupts/diagnostics/status information / Diagnoses / Overload currentYes
Напряжение питанияYes
Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status displayYes; green LED
Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnosticsYes; red Fn LED
Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnosticsYes; green/red DIAG LED
Напряжение питанияTRMS
Integrated Functions / Measuring functions / Measuring procedure for current measurementTRMS
Integrated Functions / Measuring functions / Type of measured value acquisitionseamless
Напряжение питанияSinusoidal or distorted
Integrated Functions / Measuring functions / Buffering of measured variablesYes
Integrated Functions / Measuring functions / Parameter length128 byte
Integrated Functions / Measuring functions / Bandwidth of measured value acquisition3.2 kHz; Harmonics: 63 / 50 Hz, 52 / 60 Hz
Integrated Functions / Measuring functions / Measuring range / Frequency measurement, min.40 Hz
Integrated Functions / Measuring functions / Measuring range / Frequency measurement, max.70 Hz
Напряжение питания277 V
Напряжение питания480 V
Напряжение питания3 V
Напряжение питания300 V
Напряжение питания6 V
Напряжение питания519 V
Напряжение питания1.5 MΩ
Напряжение питания60 mW; 300 V AC
Напряжение питания2.5 kV
Напряжение питанияCAT II according to IEC 61010 Part 1
Integrated Functions / Measuring functions / Measuring inputs for current (Rog. or I/U converter) / Measurable current at AC, max.424 mV
Напряжение питания2 V
Напряжение питания30 V
Integrated Functions / Measuring functions / Measuring inputs for current (Rog. or I/U converter) / Input resistance120 kΩ
Integrated Functions / Measuring functions / Measuring inputs for current (Rog. or I/U converter) / Zero point suppressionYes; 0 ... 20%, referred to the nominal current
Напряжение питания0,2
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable current0,2
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable apparent power0.5
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable active power0.5
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable reactive power1
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable power factor0.5
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable active energy0.5
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable reactive energy1
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable neutral current0,2
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable phase angle±0.5 °; not covered by IEC 61557-12
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable frequency0.05; only valid for the permissible voltage measuring range
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable harmonic1
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable THDU1
Integrated Functions / Measuring functions / Accuracy class according to IEC 61557-12 / Measured variable THDI1
Напряжение питанияClass S
Integrated Functions / Measuring functions / Accuracy class line analysis acc. to IEC 61000-4-30 / Measured variable currentClass S
Integrated Functions / Measuring functions / Accuracy class line analysis acc. to IEC 61000-4-30 / Measured variable frequencyClass S
Напряжение питанияClass S
Напряжение питанияClass S
Напряжение питанияClass S
Integrated Functions / Measuring functions / Accuracy class line analysis acc. to IEC 61000-4-30 / Measured variable harmonic currentClass S
Potential separation / Potential separation channels / between the channelsNo
Potential separation / Potential separation channels / between the channels and backplane busYes
Напряжение питанияYes; Including FE
СертификацияYes
Сертификация9.32 kg
Сертификация4.97 kg
Сертификация4.79 kg
Рабочая температура-30 °C
Рабочая температура60 °C
Рабочая температура-30 °C
Рабочая температура50 °C
Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max.3 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Ambient conditions / Absolute humidity / dew point, min.-60 °C; suitable for dry room applications
Dimensions / Width20 mm
Dimensions / Height73 mm
Dimensions / Depth58 mm
Масса45 g
Сертификацияof Shipping)
Сертификация2/1/2026
Получить предложение по этой позиции