SI
Siemens AG 6ES7134-6TD00-0CA1
Модуль ввода-вывода Siemens 6ES7134-6TD00-0CA1, серия ET200SP. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.
Категории:
Технические характеристики
| Data sheet designation | SIMATIC ET 200SP, analog HART input module, AI 4XI 2-wire HART High Feature suitable for BU type A0, A1, color code CC03, channel diagnostics, 16-bit, +/-0.3%, |
|---|---|
| General information / Product type designation | AI 4xI 2-wire HART |
| General information / Firmware version | V1.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0, A1 |
| General information / Color code for module-specific color-coded label | CC03 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.5 SP4 and higher |
| General information / Engineering with / PCS 7 configurable/integrated from version | V8.1 SP1 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | GSD Revision 5 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.3 |
| General information / Operating mode / Oversampling | No |
| CiR - Configuration in RUN / Reparameterization possible in RUN | Yes |
| CiR - Configuration in RUN / Calibration possible in RUN | No |
| Напряжение питания | 24 V |
| Напряжение питания | 19.2 V |
| Напряжение питания | 28.8 V |
| Напряжение питания | Yes |
| Input current / Current consumption, max. | 25 mA; without sensor supply |
| Encoder supply / 24 V encoder supply / 24 V | Yes |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes |
| Encoder supply / 24 V encoder supply / Output current, max. | 20 mA; max. 50 mA per channel for a duration < 10 s |
| Power loss / Power loss, typ. | 0.65 W; without sensor supply |
| Address area / Address space per module / Address space per module, max. | 8 byte; + 1 byte for QI information |
| Address area / Address space per module / Address space per module with HART, max. | 28 byte; + 1 byte for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Analog inputs / Number of analog inputs | 4; Differential inputs |
| Analog inputs / Input ranges (rated values), currents / -20 mA to +20 mA | No |
| Analog inputs / Input ranges (rated values), currents / 4 mA to 20 mA | Yes; 15 bit + sign |
| Analog inputs / Input ranges (rated values), currents / Input resistance (4 mA to 20 mA) | 280 Ω; + approx. 0.35 V diode forward voltage |
| Analog inputs / Cable length / shielded, max. | 800 m |
| Analog value generation for the inputs / Measurement principle | integrating (Sigma-Delta) |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes |
| Напряжение питания | No |
| Encoder / Connection of signal encoders / for current measurement as 2-wire transducer | Yes |
| Errors/accuracies / Linearity error (relative to input range), (+/-) | 0.01 % |
| Errors/accuracies / Temperature error (relative to input range), (+/-) | 0.005 %/K |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to input range, (+/-) | 0.3 % |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Limit value alarm | Yes |
| Напряжение питания | Yes |
| Напряжение питания | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Рабочая температура | -30 °C |
| Рабочая температура | 60 °C |
| Рабочая температура | -30 °C |
| Рабочая температура | 50 °C |
| Dimensions / Height | 73 mm |
| Dimensions / Depth | 58 mm |