SI
Siemens AG 6ES7135-6TD00-0CA1
Модуль ввода-вывода Siemens 6ES7135-6TD00-0CA1, серия ET200SP. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.
Категории:
Технические характеристики
| Data sheet designation | SIMATIC ET 200SP, analog HART output module, AQ 4xI HART High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.3% |
|---|---|
| General information / Product type designation | AQ 4xI HART HF |
| General information / Firmware version | V1.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0, A1 |
| General information / Color code for module-specific color-coded label | CC00 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | Yes; 250 µs |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V15 SP1 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.6 and higher |
| General information / Engineering with / PCS 7 configurable/integrated from version | V9.0 SP1 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | V04.02.14 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.34 |
| CiR - Configuration in RUN / Reparameterization possible in RUN | Yes |
| CiR - Configuration in RUN / Calibration possible in RUN | No |
| Напряжение питания | 24 V |
| Напряжение питания | 19.2 V |
| Напряжение питания | 28.8 V |
| Напряжение питания | Yes |
| Input current / Current consumption (rated value) | 115 mA |
| Input current / Current consumption, max. | 125 mA |
| Power loss / Power loss, typ. | 1.7 W |
| Address area / Address space per module / Address space per module, max. | 8 byte; + 1 byte for QI information |
| Address area / Address space per module / Address space per module with HART, max. | 28 byte; + 1 byte for QI information |
| Hardware configuration / Automatic encoding / Mechanical coding element | Yes |
| Hardware configuration / Automatic encoding / Type of mechanical coding element | Type A |
| Analog outputs / Number of analog outputs | 4 |
| Напряжение питания | 28 V |
| Analog outputs / Cycle time (all channels), min. | 3 ms |
| Analog outputs / Output ranges, current / 0 to 20 mA | Yes; 16 bit incl. sign |
| Analog outputs / Output ranges, current / -20 mA to +20 mA | No |
| Analog outputs / Output ranges, current / 4 mA to 20 mA | Yes; 16 bit incl. sign |
| Analog outputs / Connection of actuators / for current output two-wire connection | Yes |
| Analog outputs / Load impedance (in rated range of output) / with current outputs, max. | 750 Ω |
| Analog outputs / Load impedance (in rated range of output) / with current outputs, inductive load, max. | 10 mH |
| Напряжение питания | 30 V |
| Analog outputs / Cable length / shielded, max. | 800 m |
| Analog value generation for the outputs / Settling time / for resistive load | 2 ms; 750 ohm |
| Analog value generation for the outputs / Settling time / for capacitive load | 2 ms |
| Analog value generation for the outputs / Settling time / for inductive load | 2 ms |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to output range, (+/-) | 0.1 % |
| Protocols / HART protocol | Yes |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Substitute values connectable | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Напряжение питания | Yes; module-wise |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes; channel by channel |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes; channel by channel |
| Напряжение питания | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Напряжение питания | Yes |
| Permissible potential difference / between different circuits | 60 V DC/30 V AC |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Рабочая температура | -30 °C |
| Рабочая температура | 60 °C |
| Рабочая температура | -30 °C |
| Рабочая температура | 50 °C |
| Dimensions / Height | 73 mm |
| Dimensions / Depth | 58 mm |