ПЛК и системы автоматизации
SI

Siemens AG 6ES7136-6AB00-0CA1

Модуль ввода-вывода Siemens 6ES7136-6AB00-0CA1, серия ET200SP. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.

  • Бренд: Siemens AG
  • Артикул (MPN): 6ES7136-6AB00-0CA1
  • Серия: ET200SP Series
  • Статус производства: Не определён

Категории:

Технические характеристики

Data sheet designationSIMATIC DP, electronics module ET 200SP, F-AI 4xU 0..10V HF, fail-safe analog inputs, up to PL E (ISO 13849), up to SIL 3 (IEC 61508)
General information / Product type designationF-AI 4XU 0..10V HF
General information / Firmware version / FW update possibleYes
General information / usable BaseUnitsBU type A0, A1
General information / Color code for module-specific color-coded labelCC00
General information / Product function / I&M dataYes; I&M0 to I&M3
General information / Engineering with / STEP 7 TIA Portal configurable/integrated from versionV16 with HSP 308
General information / Operating mode / cyclic measurementYes
General information / Operating mode / OversamplingNo
CiR - Configuration in RUN / Reparameterization possible in RUNNo
CiR - Configuration in RUN / Calibration possible in RUNNo
Напряжение питания24 V
Напряжение питания19.2 V
Напряжение питания28.8 V
Напряжение питанияYes
Напряжение питанияNo
Input current / Current consumption (rated value)0.38 A
Input current / Current consumption, max.0.4 A
Encoder supply / 24 V encoder supply / 24 VYes; min. L+ (-1.5 V)
Encoder supply / 24 V encoder supply / Short-circuit protectionYes
Encoder supply / 24 V encoder supply / Output current, max.300 mA; total current of all encoders/channels
Power / Power consumption from the backplane bus70 mW
Power loss / Power loss, typ.2 W
Address area / Address space per module / Inputs14 byte; S7-300/400F CPU, 13 byte
Hardware configuration / Automatic encodingYes
Hardware configuration / Electronic coding element type HYes
Analog inputs / Number of analog inputs4
Напряжение питания16 kΩ
Analog inputs / Cable length / shielded, max.200 m
Analog value generation for the inputs / Measurement principleSigma Delta
Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max.16 bit
Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizableYes
Analog value generation for the inputs / Smoothing of measured values / parameterizableYes
Analog value generation for the inputs / Smoothing of measured values / Step: NoneYes; 1x conversion cycle time
Analog value generation for the inputs / Smoothing of measured values / Step: lowYes; 2x / 4x conversion cycle time
Analog value generation for the inputs / Smoothing of measured values / Step: MediumYes; 8x / 16x conversion cycle time
Analog value generation for the inputs / Smoothing of measured values / Step: HighYes; 32x / 64x conversion cycle time
Analog value generation for the inputs / Smoothing of measured values / Average value filterYes
Напряжение питанияYes
Errors/accuracies / Linearity error (relative to input range), (+/-)0.1 %
Напряжение питания0.1 %
Напряжение питанияfrequency
Errors/accuracies / Series mode interference (peak value of interference <40 dB
Напряжение питания10 V
Errors/accuracies / Common mode interference, min.70 dB
Interrupts/diagnostics/status information / Diagnostics functionYes
Interrupts/diagnostics/status information / Alarms / Diagnostic alarmYes
Interrupts/diagnostics/status information / Alarms / Limit value alarmNo
Напряжение питанияYes
Interrupts/diagnostics/status information / Diagnoses / Wire breakYes
Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LEDYes; green LED
Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LEDYes; red LED
Напряжение питанияYes; green PWR LED
Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status displayYes; green LED
Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnosticsYes; red LED
Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnosticsYes; green/red DIAG LED
Potential separation / Potential separation channels / between the channelsNo
Isolation / Isolation tested with707 V DC (type test)
СертификацияYes
Сертификация88.3 kg
Сертификация13.1 kg
Сертификация76.6 kg
СертификацияCat. 4
СертификацияSIL 3
Сертификацияof 100 hours)
Сертификация< 5.00E-05
Рабочая температура0 °C
Рабочая температура60 °C
Рабочая температура0 °C
Рабочая температура50 °C
Dimensions / Width15 mm
Dimensions / Height73 mm
Dimensions / Depth58 mm
Получить предложение по этой позиции