wenglor sensoric GmbH FXPL002
Fill-level Sensor with IO-Link
Категории:
Технические характеристики
| Measuring principle | Frequency sweep |
|---|---|
| Measuring Range > DK*** | 1.5 |
| Medium | Liquids, granulate, powder |
| Время отклика | 0.04 s |
| Media temperature TM (TU < 50 °C) | -40 ... 115 °C** |
| Media temperature TM brief (TU < 50 °C, t < 1 h) | -40 ... 130 °C |
| Рабочая температура | -40 ... 85 °C |
| Storage temperature | -40 ... 85 °C |
| Pressure Resistance | 100 bar |
| EMC | DIN EN 61326 * |
| Vibration resistance per DIN IEC 60068-2-6 | 1,6 mm p-p (2...25 Hz), 4 g (25...100 Hz) |
| Напряжение питания | 8 ... 36 V DC |
| Current Consumption (Ub = 24 V) | < 35 mA |
| Number of Switching Outputs | 2 |
| Power-up Time | < 3 s |
| Switching Output / Switching Current | 100 mA |
| Напряжение питания | < 0.7 V |
| Signal source | Change of medium |
| Leakage Current | < 100 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | IO-Link V1.1 |
| Setting Method | Teach-in/IO-Link |
| Материал | Stainless steel, V4A (1.4404/316L) Plastic, PC |
| Материал | Plastic, PEEK |
| Degree of Protection | IP67 IP69K |
| Connection Type | Plug variant |
| Connection | M12 × 1; 4-pin |
| Материал | Polycarbonate |
| Process Connection | 1/2” NPT |
| Масса | 71 g |
| MTTFd (EN ISO 13849-1) | 686 a |
| Scope of delivery | 1 × initial start-up instructions 1 × sensor |
| Attenuation (adjustable) | 0 ... 10 s |
| Selective fill-level measurement | yes |
| IO-Link | yes |
| Push-Pull | yes |
| Output | Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| Other parameters | 2 switching points |