wenglor sensoric GmbH INTT231
Inductive Analysis Module for Extreme Temperature Ranges
Категории:
Технические характеристики
| Switching Distance | 25 mm |
|---|---|
| Use | With INTT220 |
| Напряжение питания | 10 ... 30 V DC |
| Напряжение питания | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 50 Hz |
| Temperature Drift | < 10 % |
| Analysis module temperature range | 0 ... 70 °C |
| Number of Switching Outputs | 2 |
| Напряжение питания | < 1.5 V |
| Switching Output / Switching Current | 100 mA |
| Residual Current Switching Output | < 100 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| Материал | Stainless steel, V2A (1.4305/303) |
| Degree of protection , analysis module | IP65 |
| Degree of protection for push-pull connector | IP50 IP51 * |
| Connection Type | Plug variant |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 20 m |
| Материал | Plastic, PFA |
| Outer diameter cable | 3.4 mm |
| Bending Radius | > 17 mm |
| PWIS-free | yes |
| Масса | 898 g |
| MTTFd (EN ISO 13849-1) | 3,706.54 a |
| Scope of delivery | 1 × analysis module 1 × initial start-up instructions 1 × MUTTER-M18-E003 hex nut |
| Error Indicator | yes |
| Programmable switching distance | 15/20/25 mm |
| IO-Link | yes |
| Error Output | yes |
| PNP NO | yes |
| Output | Error Output Push-pull NPN PNP |
| Circuit | NC NC+NO NO |