wenglor sensoric GmbH IR2D001
Inductive Sensor Ring sensor
Категории:
Технические характеристики
| Inside diameter | 10.2 mm |
|---|---|
| Max. tube diameter | 10 mm |
| Installation A/Bx/By/C in mm | 0/15/35/5 |
| Installation A/Bx/By/C in mm with frequency switching | 0/0/0/5 |
| Principle | Dynamic |
| Smallest recognizable object (Ø) | 2 mm* |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1/1/1 |
| Напряжение питания | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Object speed | 0.1 ... 50 m/s |
| Время отклика | < 300 µs |
| Ready-state delay | < 1.5 s |
| Напряжение питания | 1.5 V |
| Temperature Range | 0 ... 60 °C |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Reverse Polarity Protection | yes |
| Switching Output / Switching Current | 100 mA |
| Pulse extension | 200 ms |
| Interface | IO-Link V1.1 |
| IO-Link Version | 1.1 |
| Connection Type | Plug variant |
| Connection | M8 × 1; 4-pin |
| Setting Method | Potentiometer/IO-Link |
| Материал | Plastic, PA |
| Hanger opening/closing cycles | Max. 100 |
| Degree of Protection | IP54 |
| Масса | 26 g |
| MTTFd (EN ISO 13849-1) | 1,018.99 a |
| Scope of delivery | 1 × ZR0E001 soft binder |
| Packaging unit | 1 Piece |
| PNP NO | yes |
| Output | PNP Push-pull NPN |
| Circuit | NO NC NC/NO |
| Other parameters | Sensitivity Error indicator Frequency switching |