wenglor sensoric GmbH OPT104-P08
Reflex Sensor with background suppression electronic
Категории:
Технические характеристики
| Range | 550 mm |
|---|---|
| Potentiometer min | 220 ... 270 mm |
| Potentiometer center | 320 ... 400 mm |
| Potentiometer max | 550 ... 630 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Infrared, LED |
| Wavelength | 880 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Risk Group (EN 62471) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Principle | Triangulation |
| Напряжение питания | 18 ... 30 V DC |
| Current Consumption Sensor (Ub = 24 V) | < 30 mA |
| Switching Frequency | 100 Hz |
| Время отклика | 5 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -15 ... 50 °C |
| Number of Switching Outputs | 1 |
| Напряжение питания | < 0.8 V |
| PNP Switching Output / Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Equipment | Logics Solenoid valve |
| Single Discharge | yes |
| Block Forwarding | yes |
| Protection Class | III |
| Setting Method | Potentiometer |
| Материал | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection Type | 1 socket with cable |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 2 m |
| Масса | 340 g |
| Scope of delivery | 1 × Z0034 molded seal 1 × VENTIL-K04 solenoid valve 1 × M2.5 screw × 22 mm 1 × sensor |
| Valve no. | K04 |
| Напряжение питания | 19.2 ... 28.8 V |
| Current Consumption Valve | 86 mA |
| Operating Pressure | 4 ... 7 bar |
| Nominal Width | 0.8 mm |
| Nominal flow rate 1 -> 2 | 20 NL/min |
| Nominal flow rate 2 -> 3 | 100 NL/min |
| Supply-Line Connector Pipe | 2× 8×1 |
| Working-Line Connector Pipe | 4×1 |
| Valve function | 3/2-Way |
| Switching function | NC |
| PNP NC | yes |