wenglor sensoric GmbH OTDK502A0002
Reflex Sensor Energetic
Категории:
Технические характеристики
| Range | 500 mm |
|---|---|
| Switching Hysteresis | < 15 % |
| Light Source | Infrared, LED |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Light Spot Diameter | see table 1 |
| Напряжение питания | 10 ... 30 V DC |
| Напряжение питания | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 500 Hz |
| Время отклика | 1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Напряжение питания | < 2.5 V |
| PNP Switching Output / Switching Current | 200 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| Setting Method | Potentiometer |
| Материал | Plastic, ABS-GF |
| Degree of Protection | IP67 |
| Connection Type | Plug variant |
| Connection | M12 × 1; 4-pin |
| Масса | 8 g |
| MTTFd (EN ISO 13849-1) | 2,988.01 a |
| Scope of delivery | 1 × Z0008 mounting console 1 × initial start-up instructions 1 × MUTTER-M18-E012 hex nut 1 × sensor |
| Packaging unit | 1 Piece |
| IO-Link | yes |
| PNP NC , PNP NO | yes |
| Output | Push-pull NPN PNP |
| Circuit | NC NC+NO NO |
| Other parameters | Off-delay On-delay Mode of operation Error output Switching hysteresis Emitted light |