wenglor sensoric GmbH P1KH012
Reflex Sensor with Background Suppression Mechanical
Категории:
Технические характеристики
| Range | 300 mm |
|---|---|
| Setting Range | 30 ... 300 mm |
| Switching Hysteresis | < 5 % |
| Light Source | LED, red |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see table 1 |
| Optical axis | Aligned |
| Switching point | Calibrated |
| Principle | Triangulation |
| Напряжение питания | 10 ... 30 V DC |
| Напряжение питания | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 1,000 Hz |
| Switching Frequency ( interference-free mode ) | 500 Hz |
| Время отклика | 1 ms |
| Время отклика | 0.5 ms |
| Temperature Drift (0 °C < Tu < 40 °C) | < 5 % * |
| Temperature Range | -40 ... 60 °C |
| Напряжение питания | < 2 V |
| Switching Output / Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| Setting Method | Multi-turn |
| Материал | Plastic, ABS/PC |
| Degree of Protection | IP67 IP68 |
| Connection Type | Plug variant |
| Connection | M8 × 1; 3-pin |
| Optic Cover | Plastic, PMMA |
| Масса | 6 g |
| MTTFd (EN ISO 13849-1) | 2,045.4 a |
| Scope of delivery | 1 × initial start-up instructions 1 × sensor |
| PNP NO | yes |
| IO-Link | yes |
| Output | Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |