wenglor sensoric GmbH P1PM103
Reflex Light Barrier
Категории:
Технические характеристики
| Range | 1,000 mm |
|---|---|
| Reference Background | White, 90% remission |
| Switching Hysteresis | < 5 % |
| Light Source | LED, red |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see table 1 |
| Optics | Two-Lens Optic |
| Optical axis | Aligned |
| Switching point | Calibrated |
| Напряжение питания | 15 ... 30 V DC |
| Напряжение питания | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 900 Hz |
| Switching Frequency ( interference-free mode ) | 450 Hz |
| Время отклика | 0.6 ms |
| Время отклика | 1.1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Напряжение питания | < 2 V |
| PNP Switching Output / Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Teach Mode | moving background |
| Interface | IO-Link V1.1 |
| IO-Link Version | 1.1 |
| Protection Class | III |
| Setting Method | Teach-In |
| Материал | Plastic, ABS/PC |
| Degree of Protection | IP67 IP68 |
| Connection Type | Plug variant |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Масса | 35 g |
| MTTFd (EN ISO 13849-1) | 803.65 a |
| Scope of delivery | 1 × Z1PE002 mounting set 1 × initial start-up instructions 1 × sensor |
| PNP NO | yes |
| External teach-in input | yes |
| IO-Link | yes |
| Output | Push-pull NPN PNP |
| Circuit | NC NC+NO NO |
| Other parameters | Off-delay On-delay Dynamic readjustment Error output Filter Hysteresis Emitted light Teach mode |
| white (90 %) | 0.1 ... 1 m |
| grey (18 %) | 0.1 ... 0.7 m |
| black (6 %) | 0.1 ... 0.45 m |
| Stainless Steel | 0.1 ... 1 m |