wenglor sensoric GmbH ZAC50EN02
Switch with PoE
Технические характеристики
| Напряжение питания | 18 ... 32 V |
|---|---|
| Power consumption of device max. | 0.25 A |
| Power consumption of system max. | 2 A |
| Max. PoE Capacity | 25 W |
| Max. Switching Current Switching Outputs | 0.6 A |
| max. total current of the digital I/O ports | 1 A |
| Напряжение питания | < 2.5 V |
| Temperature Range | -25 ... 60 °C |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Reverse Polarity Protection | yes |
| PoE Ports | 2 |
| Number of digital I/O ports | 2 |
| Supported PoE Standard | IEEE802.3af, IEEE802.at |
| Supported PoE Classes | Class 0, 1, 2, 3 |
| Transmission rate | 10/100 Mbit/s |
| Transmission Mode | Full/Half Duplex |
| Switch Mode | Store & Forward |
| VLAN Prioritization | yes |
| Auto-Crossover | yes |
| Auto-Negotiating | yes |
| Auto-Polarity | yes |
| Interface | EtherNet/IP™ |
| Protection Class | III |
| Setting Method | Web server |
| Материал | Aluminum |
| Degree of Protection | IP67 |
| Type of Connection Power | 2 × 7/8", 5-pin |
| Type of Connection Industrial Ethernet Ports | 2 × M12; 4-pin |
| Type of Connection PoE Ports | 2 × M12; 8-pin |
| Type of connection digital I/O ports | 2 × M12; 4-pin |
| Масса | 1,121 g |
| Scope of delivery | 1 × BEF-SET-40 mounting set 1 × initial start-up instructions 1 × switch 1 × thermal transfer printing adhesive label |
| EtherNet /IP™ | yes |
| Power Source Equipment for PoE | yes |